grub的使用.ppt

How to use Grub
IN LINUX

CONTENT
After starting the engine into the GRUB program, select your system interface, the user can stop the running GRUB into the GRUB program, manually set GRUB parameters, and then start the system.
If the user needs to enter BRUB, when you start to BRUB selection interface, as shown, through the cursor keys to move the black display bar, select the operating system need to manually edit the name. Then click the button "e" to enter edit the status of the operating system boot parameters as shown in Figure (1)
Figure (1)
● Display start set the parameters of the system.
If you need to add a new line, press the"o" key,in the current black displaya new line inserted after section.
●Press "e" key to enter the input after the input state. Enter carriage return to return pletion of figure (1) of the interface.
● If you do not save can also press the "Esc" key to return to the original interface. If you want to delete the line press the "d" key, and the vi editor is somewhat similar. By "b" key to boot the system is started.
If you edit the original line, then
ove directly to the
diverted to the black
display bar, and then
press the "e" key to
enter the modifications
of the state. This adds
a new line "e" key to
enter the same state,
as shown in
Figure (2) said:
The work of booting the system by mands, step by step guide sys