接地与接地技术摘要: 本文主要介绍了接地技术的概念、定义、接地的原因、方法以及接地的种类。还有对接地技术的要求和接地技术的一些实际应用。关键字:低阻抗;信号地;安全;防雷; 引言: 目前建筑安装施工规范中介绍了常规的接地工艺, 这种接地工艺对传统的简单电气设备是可行的, 但是对于复杂的建筑物如智能化建筑和复杂的大型重要设备如发电机组等, 常规的接地方法将难以满足要求, 甚至会埋下事故隐患。因此, 我们需要多了解接地方面的的一些知识。 Abstract: this paper mainly introduces the concept, definition, the cause of the grounding of grounding technology as well as the types of grounding. And docking technology requirements and some practical application of grounding technology. Key words: low impedance; Signal ground; Safety; Lightning protection; Quote: In the construction and installation construction specification standard grounding technology is introduced, the grounding technology on the traditional simple electrical equipment is feasible, but plex structures such as intelligent buildings plex large important equipment such as generator set, etc., conventional methods of grounding would be difficult to meet the requirements, and even buried accidents. Therefore, we need to know more about some knowledge of the earth. 一、接地的概念及其定义“接地”就是指在系统与某个电位基准之间建立低电阻通路,相同接地点之间的连线被称为地线。通常电子设备的“地”有两种含义: 一种是接“大地”。以大地作为零电位, 把电子设备的金属外壳、电路基准点与大地相连, 有保护设备和人员安全的作用, 如保护接地、防雷接地等,通常称之为“安全地”。另一种是“系统基准地”。在弱电系统中的接地不一定是指真实意义上与地球相连的接地, 有提高系统稳定性、屏蔽保护性以增强系统电磁兼容性的作用, 在必要时也可做接“大地”处理,通常称之为“信号地”在现代接地概念中、对于线路工程师来说,接地的含义通常是‘线路电压的参考点’; 对于系统设计师来说, 它常常是机柜或机架; 对电气工程师来说, 它是绿色安全地线或接到大地的意思。一个比较通用的定义是“接地是电流返回其电源的低阻抗通道”。注意要求是”低阻抗”和“通路”。二、接地的
接地与接地技术 来自淘豆网www.taodocs.com转载请标明出处.