Standard of People’s Republic of China
Motor vehicles- Procedure for H-point determination
GB/T 11563-1995
Replacing GB/T 11563-89
This standard is equivalent to the international standard ISO 6549-1980 Road Vehicle- Determination of H point.
Subject content and scope of application
This standard prescribed the program to determine the H point position of vehicle seats using a three dimensional H point device.
This standard is applicable to the design and test of any vehicles with the vertical distance between the driver’s heel point and R point be less than 550mm, the backrest backwards inclination angle be larger than 5°, or the angle between the thigh central line presented by the thigh rod and the horizontal line be larger than 5°.
Terms
Three dimensional H point device
It is a device used to determine the H point of the vehicle’s seats.
H point
It means the joint center of the three dimensional H point device’s body and thigh, it is located at the central line between the H point buttons to the two sides of the device.
“R point” or “Seating reference point”
It means the design H point prescribed by the manufacturer, this point:
a. Determines the rearmost normal driving and seating position of each design seating position of the seats prescribed by the manufacturer, it takes consideration of the possible adjusting status (level, vertical and inclined) of all
GBT11563-1995标准(英文版) 来自淘豆网www.taodocs.com转载请标明出处.